Forums » Suggestions
Do not read!
I told you not do read this!!! However this Isn't even under the correct thread.
Huzzah! In spite of my last failed ideas I shall continue making more fails...
Concerning Guild stations and deeper thought
Players shall make use of the conquerable stations (again) for the construction of a guild station... It shall not reward anyone forselling items their (0c). Just like conquer stations. The station will be comprised of similar items to the trident. The station will take similar shape to that of Latos I-8.
Here is the list that (to me) makes literal sense.
Airlock maintenance supplies x50
Consumer electronics x200
Diagnostic Imagers x20
Data Link Connectors x1000
Escape Hatch system x8
EC-class ship repair manual x20
Energy conversion module x50
Frequency modulators x10
Emergency repair kit x20
Exhaust manifold x10
Cooking supplies* x10
External Equipment mount x125
Fuel Flow regulators x10
Fuel storage container x100
Hull panels x500
Hydraulic tappets x22
Instrumentation panel x46
Janitorial Supplies x37
Life support system x5
Medical Supplies x39
Outer hull plates x260
Oxygen Recycling system x4
Plasteel x400
Power Regulators x260
Pressure relief valves x30
Protective outerwear x40
Extra-vehicular suits x40
Radiation containment kit x162
Replacement Hydraulic fluid* x74
Scanner circuit boards x136
Superconductors x410
Surveillance equipment x5
Thermal insulator tiles x89
Waste treatment chemicals x67
Xang Xi waste container x67
Xang Xi Advanced Robotics x40
Fused Composite Plating x70
Fluid formable silksteel alloy x40
Seipos Master computing system** x1
Prosus Master computing system** x1
External Hull assembly x20
Reinforced Bulkhead x15
Internal bulkhead assembly x20
Docking bay hangar assembly x8
200mw Torodial Hyper-plasma reactor x2
*I have never seen these. I don't know if they're still around or if their hard to find.
**Prosus and seipos computers:
2 of each Master Computing system has been tested thanks to the valiant efforts of the TPG corporation... The test results show that the Seipos computer is very good at operating foreign equipment, such as unmanned robotics. (They also have considered the thought of the hive using these). The Prosus computer has been resulted as a computer that is best fitted in stations due to it's versatility in it's power. It has been shown to work in good localized conditions. The Milnar computer has been shown to have excellent communication capabilities within a localized area. (like a ship). The speed tests "were off the chart" under transferring large amounts of data.
The seipos computers require large amounts of power, 2 reactors shall be included in the construction of the station. One to power the computers. One to power the mainframe of the station (such as basic electronic parts).
8 docking bay hangar assemblies are needed. based on the study of the Latos I-8 station, 2 will bee needed for each bay. 3 exits and 1 entrance equal to 8 assemblies. Each assembly takes base of a wide half-hexagon form. 2 assemblies shall Make one completed dock. External hull assemblies, fused composite plating, reinforced bulkheads, and internal bulkheads create the walls of the station.
The final assembly mission will take place at Latos M-7. Since this is a guild station, the Manufacturing mission will be available to be "group-friendly". Once the construction is completed, another step will appear. The location. A set of choices will be made to figure the location of the stations construction. (system, Row, col.). The guild must wait 7 days for the complete construction of the station. Meanwhile during the 7 days the station will look like Edras I-8. (go there yourself, I'm too lazy to put a pic here). After the construction, no one will be able to enter until the group leader, or person that took the assembly mission Takes One final step to retrieve the station keys. Keys will bd given by default to all guild members. And other people outside of the guild can be added by the owner. It is up to the guild to keep the location secret, (mainly by not chatting about it on 100, tell new members to shut up, and turn the location unchecked on the buddies list. The next step will be where the seipos computer come in. As said before, the seipos computer is excellent at operating foreign equipment (foreign=out of station / local=in station). The station will not be conquerable due to the tremendous efforts to complete it. However, a mission to manufacture turrets can be taken and supplies (logical) needed as follows:
Advanced Logistics system x1
Advanced targeting system x1
Amplification module x10
Energy conversion module x7
Apiece ore x20
External equipment mounts x2
Ineubis automated defense system x2
Gauss turret mk2.
Plasma core x4
The turret is linked during construction to the seipos computer. The turrets shoot any object that enters a sector without an IFF marked key. The turrets can be destroyed. But as said earlier the station cannot be conqered.
I did this when I was bored. And I honestly don't care about that -1 +1 junk. But I don't really care what you say right now...
Thanks -/me
Huzzah! In spite of my last failed ideas I shall continue making more fails...
Concerning Guild stations and deeper thought
Players shall make use of the conquerable stations (again) for the construction of a guild station... It shall not reward anyone forselling items their (0c). Just like conquer stations. The station will be comprised of similar items to the trident. The station will take similar shape to that of Latos I-8.
Here is the list that (to me) makes literal sense.
Airlock maintenance supplies x50
Consumer electronics x200
Diagnostic Imagers x20
Data Link Connectors x1000
Escape Hatch system x8
EC-class ship repair manual x20
Energy conversion module x50
Frequency modulators x10
Emergency repair kit x20
Exhaust manifold x10
Cooking supplies* x10
External Equipment mount x125
Fuel Flow regulators x10
Fuel storage container x100
Hull panels x500
Hydraulic tappets x22
Instrumentation panel x46
Janitorial Supplies x37
Life support system x5
Medical Supplies x39
Outer hull plates x260
Oxygen Recycling system x4
Plasteel x400
Power Regulators x260
Pressure relief valves x30
Protective outerwear x40
Extra-vehicular suits x40
Radiation containment kit x162
Replacement Hydraulic fluid* x74
Scanner circuit boards x136
Superconductors x410
Surveillance equipment x5
Thermal insulator tiles x89
Waste treatment chemicals x67
Xang Xi waste container x67
Xang Xi Advanced Robotics x40
Fused Composite Plating x70
Fluid formable silksteel alloy x40
Seipos Master computing system** x1
Prosus Master computing system** x1
External Hull assembly x20
Reinforced Bulkhead x15
Internal bulkhead assembly x20
Docking bay hangar assembly x8
200mw Torodial Hyper-plasma reactor x2
*I have never seen these. I don't know if they're still around or if their hard to find.
**Prosus and seipos computers:
2 of each Master Computing system has been tested thanks to the valiant efforts of the TPG corporation... The test results show that the Seipos computer is very good at operating foreign equipment, such as unmanned robotics. (They also have considered the thought of the hive using these). The Prosus computer has been resulted as a computer that is best fitted in stations due to it's versatility in it's power. It has been shown to work in good localized conditions. The Milnar computer has been shown to have excellent communication capabilities within a localized area. (like a ship). The speed tests "were off the chart" under transferring large amounts of data.
The seipos computers require large amounts of power, 2 reactors shall be included in the construction of the station. One to power the computers. One to power the mainframe of the station (such as basic electronic parts).
8 docking bay hangar assemblies are needed. based on the study of the Latos I-8 station, 2 will bee needed for each bay. 3 exits and 1 entrance equal to 8 assemblies. Each assembly takes base of a wide half-hexagon form. 2 assemblies shall Make one completed dock. External hull assemblies, fused composite plating, reinforced bulkheads, and internal bulkheads create the walls of the station.
The final assembly mission will take place at Latos M-7. Since this is a guild station, the Manufacturing mission will be available to be "group-friendly". Once the construction is completed, another step will appear. The location. A set of choices will be made to figure the location of the stations construction. (system, Row, col.). The guild must wait 7 days for the complete construction of the station. Meanwhile during the 7 days the station will look like Edras I-8. (go there yourself, I'm too lazy to put a pic here). After the construction, no one will be able to enter until the group leader, or person that took the assembly mission Takes One final step to retrieve the station keys. Keys will bd given by default to all guild members. And other people outside of the guild can be added by the owner. It is up to the guild to keep the location secret, (mainly by not chatting about it on 100, tell new members to shut up, and turn the location unchecked on the buddies list. The next step will be where the seipos computer come in. As said before, the seipos computer is excellent at operating foreign equipment (foreign=out of station / local=in station). The station will not be conquerable due to the tremendous efforts to complete it. However, a mission to manufacture turrets can be taken and supplies (logical) needed as follows:
Advanced Logistics system x1
Advanced targeting system x1
Amplification module x10
Energy conversion module x7
Apiece ore x20
External equipment mounts x2
Ineubis automated defense system x2
Gauss turret mk2.
Plasma core x4
The turret is linked during construction to the seipos computer. The turrets shoot any object that enters a sector without an IFF marked key. The turrets can be destroyed. But as said earlier the station cannot be conqered.
I did this when I was bored. And I honestly don't care about that -1 +1 junk. But I don't really care what you say right now...
Thanks -/me
tl;dr
+1
-1
-1
did not read...